Reolink Go Plus User Manual

Status Light
Note:
If the camera connects the network successfully
,
there
will be
no status
LED
light up
during idle mode.
Status Light
Camera Status
Red LED solid light up then starts to
flash
Camera cannot recognize the SIM
card or there is PIN code of the SIM
card.
Red LED solid light up then flash
slowly about once every second
Camera cannot register the mobile
carrier network.
Red LED solid light up then flash
quickly about 3 times in 1s
Data call failed or requires to input
the APN.
1
Micro SD Card Slot
2
SIM Card Slot
3
Reset Hole
4
Battery Status LED

Reolink Go Plus Specifications

General

Type	CCTV security camera
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Cables included	Micro-USB
Number of cameras	1
Memory card included	MicroSD
Included memory card size	64 GB
Form factor	Bullet
Mounting type	Wall
Product color	White
International Protection (IP) code	IP65
Audio system	2-way
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video formats supported	H.265
Supported graphics resolutions	2560 x 1440
Night vision distance	10 m
Battery capacity	7800 mAh
Power source type	Battery, Solar
Built-in HDD	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Digital zoom	16 x
Operating temperature (T-T)	-10 - 55 °C
Sensor type	CMOS
4G standard	LTE
Mobile network generation	4G

Weight and Dimensions

Length	194 mm
Weight	450 g
Diameter	75 mm