Reolink Go Plus User Manual

Red LED solid light up then blue LED
starts to flash and goes off completely
Network connection failed.
Red LED solid light up then blue LED
starts to flash and solid light up
Network connection succeed.
2. Setup and Install
Set up the Camera
What’s in the Box
Note: The package content may vary and update with different version and
platforms, please take the below information only for a reference. And the actual
package content are subject to the latest information on the product selling page.
Go Plus
Activate the SIM Card for the Camera
The SIM card shall support WCDMA and FDD LTE.
Activate the card on your smartphone or with your network carrier before inserting
it into the camera.
Notes:
Camouflage Skin *1
Surveillance Sticker*1
Pack of Screws*1
Reset Needle*1
Mounting Template *1
Go Plus*1
Quick Start Guide*1
USB Cable*1
Mount*1

Reolink Go Plus Specifications

General

Type	CCTV security camera
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Cables included	Micro-USB
Number of cameras	1
Memory card included	MicroSD
Included memory card size	64 GB
Form factor	Bullet
Mounting type	Wall
Product color	White
International Protection (IP) code	IP65
Audio system	2-way
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video formats supported	H.265
Supported graphics resolutions	2560 x 1440
Night vision distance	10 m
Battery capacity	7800 mAh
Power source type	Battery, Solar
Built-in HDD	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Digital zoom	16 x
Operating temperature (T-T)	-10 - 55 °C
Sensor type	CMOS
4G standard	LTE
Mobile network generation	4G

Weight and Dimensions

Length	194 mm
Weight	450 g
Diameter	75 mm