Reolink Go Plus User Manual

3. A red LED will be on and solid for a couple of seconds, then it will go out.
4. “Network connection succeeded”. A blue LED will flash for a few seconds and
then go solid before going out, which means the camera has been successfully
connected to the network.
Note:
You may also run into the following situations:
No.
Voice Prompts
Camera Status
Solutions
1
“SIM card cannot be
recognized”
Camera cannot
recognize this SIM
card.
1. Check if the SIM card is
facing the reverse
direction.
2. Check if the SIM card is
not fully inserted and
insert it again
.
2
“The SIM card is locked
with a PIN. Please
disable it”
Camera cannot
recognize this SIM
card.
Put the SIM card into your
mobile phone and disable
the PIN.

Reolink Go Plus Specifications

General

Type	CCTV security camera
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Cables included	Micro-USB
Number of cameras	1
Memory card included	MicroSD
Included memory card size	64 GB
Form factor	Bullet
Mounting type	Wall
Product color	White
International Protection (IP) code	IP65
Audio system	2-way
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video formats supported	H.265
Supported graphics resolutions	2560 x 1440
Night vision distance	10 m
Battery capacity	7800 mAh
Power source type	Battery, Solar
Built-in HDD	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Digital zoom	16 x
Operating temperature (T-T)	-10 - 55 °C
Sensor type	CMOS
4G standard	LTE
Mobile network generation	4G

Weight and Dimensions

Length	194 mm
Weight	450 g
Diameter	75 mm