Reolink Go PT Quick Start Guide

English English7 8
Initialize the Camera
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
OFF
ON
POWER
OPEN
OPEN
POWER
OFF
ON
POWER
Step 3 Launch the Reolink App, click the “ ” button in the top right corner to add the camera.
ScantheQRcodeonthedeviceandfollowtheonscreeninstructionstofinishinitialsetup.
Step 2 Launch the Reolink Client, click the “ ” button, input the UID code of the camera to add it
andfollowtheonscreeninstructionstofinishinitialsetup.
Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App&Client.
Set up the Camera on PC (Optional)
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add

Reolink Go PT Specifications

General

Pan & Tilt	Pan: 355°, Tilt: 140°
Connectivity	4G LTE
Audio	Two-way audio
Color Night Vision	No
PIR Detection Distance	Up to 10 meters
Recording	Motion-triggered recording
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Resolution	1080p
Power Source	Rechargeable battery
Storage	microSD card (up to 128GB)
Weather Resistance	IP65
Image Sensor	CMOS sensor
Video Resolution	1080p (1920x1080) at 15 frames/sec
Lens	f=4.0mm
Alerts	Push Notifications, Email Alerts