English English9 10
Solutions:
• Connect the camera to the NVR with an Ethernet cable. Go to Network
> Wi-Fi > Settings on the monitor to sync the NVR’s WiFi.
• Install the camera within the NVR’s signal range.
• Install antennas on the camera and the NVR.
If these won‘t work, please contact Reolink
Support https://support.reolink.com
Cause 4
：
No WiFi After Removing the Ethernet Cable
Specication
Operating Temperature: -10°C to 45°C
RLN12W Size: 255 x 49.5 x 222.7mm
Weight: 1.4kg, for RLN12W
NVR
Notication of Compliance
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
ISED Compliance Statements
This marking indicates that this product should not be disposed with
other household wastes. throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources.
Correct Disposal of This Product
UKCA Declaration of Conformity
Reolink declares that this product is in compliance with Electromagnetic
Compatibility Regulations 2016 and Electrical Equipment Safety
Regulations 2016.
Reolink declares that this device is in compliance with the essential
requirements and other relevant provisions of EMC Directive 2014/30/EU
and LVD 2014/35/EU.
Simplied EU Declaration of Conformity
WiFi Operating Frequency
OPERATING FREQUENCY :
2.4 GHzEIRP< 20dBm 5 GHzEIRP< 20dBm 5.8GHz EIRP< 14dBm
To Next Page
Loading...
Need help?
General