19
To access the various sections and modify the data, proceed as indicated below:
Press and hold the buttons at the same time
for 5 seconds until you hear the beep and the key pad is unlocked.
Press the button
to enter the time section.
Press the button
to access the desired section.
Press the button
on the display and the digits on the right will start flashing.
Modify at will with the buttons
.
Confirm data with button
.
RAPID CONTROL OF REGENERATION PHASES
To manually start a regeneration process and monitor the correct operation of the individual phases of the blackout cycle,
follow the instructions:
Press and hold the buttons at the same time
or 5 seconds until you hear the beep and the key pad is unlocked.
Press the button
and a complete regeneration process will immediately start.
If you wish to proceed directly to a subsequent regeneration phase, press the button
.
To Next Page
Loading...
