| © 2020 ResMed. 24/03/20 - COVID-19 - This document is based on information available at the time of publication
8
Perform the Learn Circuit
To connect a double limb circuit:
1. Ensure the device is fitted with the
double limb adapter (otherwise change
the adapter).
2. Start the test and follow the instructions
on the screen
3. Select the type of circuit
4. Connect all required circuit accessories
(e.g. humidifier or filters) and perform
perform a Learn Circuit
5. Select the interface type: Mask
* Oxygen flow must be turn off during the
Learn Circuit procedure
To Next Page
Loading...
Need help?
General
