ResMed lumis series Clinical Guide

6
The common adjustable parameters for different modes in the Lumis device are shown below.
Parameter
Mode
S
ST
T
PAC
iVAPS
CPAP
Set Pressure

IPAP
   
EPAP





Min PS

Max PS

Min EPAP*

Max EPAP*

Resp. Rate

Backup Rate
 
Target Pt Rate **

Target Va

Ti
 
Ti Max
  
Ti Min
  
Rise Time
    
Trigger
   
Cycle
  
Height

*Only available when AutoEPAP is enabled.
**Only available when iBR is enabled in ST mode.

ResMed lumis series Specifications

General

Device Type	Non-invasive ventilator
Pressure Range	4-25 cm H2O
Modes	CPAP, S, ST, T, iVAPS
Ramp Time	0-45 minutes
Humidification	Integrated heated humidifier
Data Storage	SD card
Power Supply	AC 100-240V, 50-60Hz
Weight	1.3 kg
Operating Altitude	Up to 2, 591 m
Heated Tubing	Compatible with ClimateLineAir heated tubing
Connectivity	Bluetooth
Display	LCD