EasyManuals Logo

ResMed Swift FX Bella Gray User Information

ResMed Swift FX Bella Gray
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
1
English
Please read this information in conjunction with the Swift FX or the
Swift FX Bella Gray User Guide.
Intended use
The Swift FX Bella Gray channels airflow noninvasively to a patient
from a positive airway pressure (PAP) device such as a continuous
positive airway pressure (CPAP) or bilevel system.
The Swift FX Bella Gray is:
to be used by adult patients (> 66 lb/30 kg) for whom positive
airway pressure has been prescribed
intended for single-patient re-use in the home environment and
multipatient re-use in the hospital/institutional environment.
Attaching the headgear
First remove the current headgear from the pillows, then:
1. Hold the Swift FX Bella Gray buckle with the arrow facing
you. Latch the buckle onto the node on the pillows.
2. Repeat step 1 with the other buckle.
Fitting
1. Hold the pillows at your nose ensuring that the ResMed logo
is on the top of the pillows facing up. Pull one strap around
and behind your ear.
2. Ensure the strap lies flat and is not twisted.
3. Repeat steps 1 and 2 with the other strap.
4. Adjust the mask fit by pulling the upper straps along the
notches until a comfortable fit is achieved. Repeat with the
lower straps. Do not overtighten.
5. Check that the nasal pillows are positioned upright in the
entrance of your nostrils.

Other manuals for ResMed Swift FX Bella Gray

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ResMed Swift FX Bella Gray and is the answer not in the manual?

ResMed Swift FX Bella Gray Specifications

General IconGeneral
BrandResMed
ModelSwift FX Bella Gray
CategoryMedical Equipment
LanguageEnglish

Related product manuals