To Next Page

To Previous Page

English

Guidance and Manufacturer’s Declaration - Electromagnetic Emissions and

Immunity

Guidance and manufacturer’s declaration—electromagnetic emissions

The C-Series Tango system is intended for use in the electromagnetic environment speciﬁed below. The

customer or the user of the C-Series Tango system should assure that the device is used in such an environment.

Emissions test Compliance Electromagnetic environment—guidance

RF emissions CISPR11 Group 1 The C-Series Tango system uses RF energy only f

or its internal

function. Therefore, its RF emissions are very low and are not

likely to cause any interference in nearby electronic equipment.

RF emissions CISPR 11 Class B The C-Series Tango system is suitable f

or use in all

establishments, including domestic establishments and those

directly connected to the public low-voltage network that

supplies buildings used for domestic purposes.

Harmonic Emissions

IEC 61000-3-2

Class A

Voltage Fluctuations/Flic

ker

Emissions IEC 61000-3-3

Complies

Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into

service according to EMC information provided in this document.

arnings: The C-Series Tango system should not be used adjacent to or stacked with other equipment.

If adjacent or stacked use is necessary, the C-Series Tango system should be observed to verify normal operation

in the conﬁguration in which it will be used.

The use of accessories (eg, humidiﬁers) other than those speciﬁed in this manual is not recommended. They may

result in increased emissions or decreased immunity of the C-Series Tango system.

ResMed Tango User Manual

Questions and Answers: