EasyManua.ls Logo

ReSound CL862-DRW - Page 41

ReSound CL862-DRW
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
SYMPTOM CAUSE
Excessive whistling /
feedback
Incorrect RIE mold placement
Incorrect dome placement
Excessive ear wax
Feedback control may need adjustment
RIE mold tubing worn or damaged
Hearing instrument settings not optimal
Sound distorted /
not clear
Weak battery
Improper RIE mold or domet
Hearing instrument damaged
Hearing instrument settings not optimal
Wireless does not work Possible Root Cause - Device is in flight mode
POSSIBLE REMEDY
Re-insert RIE mold carefully
Re-insert dome
Consult your hearing care professional
Consult your hearing care professional
Consult your hearing care professional
Consult your hearing care professional
Replace battery
Consult your hearing care professional
Consult your hearing care professional
Consult your hearing care professional
Open and close the battery compartment once. Wireless will reactivate 10 seconds later.
(If Root Cause is device in flight mode)
If there are any other problems not mentioned in this guide, please contact your hearing care professional.
400500011-US-16.07-Rev.A.indd 41 05-07-2016 12:18:51