NOTE:
• Never try to put the bristles of the small brush or the cleaning wire into the microphone inlets. This can
damage your hearing aids.
• Use a soft, dry cloth to wipe your earmoulds clean.
The earmould
1. Remove the earmould and tubing from the hearing
aids prior to cleaning.
2. Clean the earmould using a mild soap, and rinse
with lukewarm water.
3. After cleaning, dry the earmoulds thoroughly and
remove any residual water and debris from the
tubing utilising a small blower and wire loop.
36 Cleaning and caring for your hearing aids
To Next Page
Loading...
