EasyManua.ls Logo

Respekta PYRO 9 TOUCH - User Manual

Respekta PYRO 9 TOUCH
71 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Modell / Model
Bedienungs- und Installationsanleitung
Elektro-Einbaubackofen
PYRO 9 TOUCH
Operating and installation instructions AUTARK
Electric built-in oven
AK100-9T-4G-CS-O1-11
NEG-Novex Großhandelsgesellschaft für Elektro- und Haustechnik GmbH, Chenover Str. 5, D-67117 Limburgerhof
fi200213atNEG
D
GB

Questions and Answers

  • S
    susan97Aug 9, 2025
    Why is my Respekta PYRO 9 TOUCH Oven not heating?
    • D
      Deborah LopezAug 9, 2025
      If your Respekta Oven isn't heating, there could be several reasons: * The temperature controller might not be set correctly. Make sure to set up the temperature. * If your model has a timer, it might not be set. Set up the timer. * There might be no power. Check the power box. * The heating element could be damaged. Consider changing it for a new one.
  • D
    Deanna HarrisonAug 14, 2025
    What to do if my Respekta PYRO 9 TOUCH isn’t working?
    • L
      Lance JohnsonAug 14, 2025
      If your Respekta Oven isn’t working, here are a few things you can check: * First, see if there's an electrical current interruption. Check if your kitchen light or another appliance is working. * Next, examine the breaker. See if your breakers are working. * Also, ensure you've properly set the timer function. If not, reset the timer function.
  • W
    wendyhopkinsAug 18, 2025
    What to do if my Respekta Oven stops working suddenly?
    • H
      henrycatherineAug 18, 2025
      If your Respekta Oven suddenly stops working, consider these potential causes: * There may be a power interruption. Check if your kitchen light or other appliances are still working. * The normal close thermostat might be protective. Check if the cool fan is working; if it is, you might need to change the normal close thermostat.
  • C
    Crystal SilvaAug 25, 2025
    Why does my Respekta PYRO 9 TOUCH stop working but the cooling ventilator is still working?
    • A
      Andrew KaneAug 25, 2025
      If your Respekta Oven stops working but the cooling ventilator continues to run, here's what could be happening: * The oven may have been working for a long time, requiring an extended cooling period. Put your hand near the outlet to check if hot air is coming out; if it is, this is normal. * The normal open thermostat might have a problem. If the air from the outlet is at room temperature, you should change the normal open thermostat.
  • D
    Danny MooreAug 29, 2025
    What to do if water comes out from the glass door of my Respekta Oven?
    • R
      Rachel KeyAug 29, 2025
      If water is coming out from the glass door of your Respekta Oven while it's working: * The door seal may be blown. Consider changing it for a new one. * The hinge might not be strong enough. Change it for a new one.
  • A
    ashley54Sep 2, 2025
    How to fix a Respekta PYRO 9 TOUCH lamp that isn’t coming on?
    • T
      Tracey GrahamSep 2, 2025
      If the lamp in your Respekta Oven isn’t coming on: * The lamp may be defective. Try changing it for a new one. * There might be no electrical current. Check if the oven has electrical current.

Respekta PYRO 9 TOUCH Specifications

General IconGeneral
TypeBuilt-in
Energy efficiency classA
Control typeTouch
Number of functions9
Cleaning typePyrolytic
Pyrolytic cleaningYes
TimerYes
Interior lightingYes

Related product manuals