7
2.Installation
Before installation
The appliance should be installed built in the cabinet . It should be keep safety distance with
appliance and the kitchen walls. Detail pls check below picture . (values in mm).
Surfaces, synthetic laminates and adhesives used must be heat resistant(100℃ minimum),
and neighboring unit fronts up to 70℃.
Kitchen cabinets must be set level and fixed. A gap of 5 mm is required between the
appliance and surrounding unit fronts.
If there is a drawer beneath the oven, a shelf must be installed between oven and drawer.
Installation method 1
Installation method 2
To Next Page
Loading...
