Need help?Do you have a question about the Response SL2 and is the answer not in the manual?
Ensures alarm system complies with local laws and regulations for installation and operation.
States the wireless alarm system's compliance with R&TTE directive essential requirements.
Lists the necessary tools and equipment for installing the alarm system.
Explains how various barriers affect the system's wireless range and provides reduction percentages.
Details the system's design for intruder detection and deterrence, mentioning house codes.
Provides essential safety advice for using power tools, ladders, and protective equipment during installation.
Informs users about the availability of an online installation video for the alarm system.
Advises caution regarding coin cell batteries, especially for children's safety.
Emphasizes the importance of checking battery condition using the date code before system installation.
Explains the two arming modes: Instant-Arm and Delay-Arm, and their immediate effects.
Details the 15-second entry/exit delay feature for convenient access and egress.
Describes the system's lockout feature which prevents re-arming after multiple alarms.
Explains how devices are protected against unauthorized interference, triggering an alarm.
Details the feature that detects attempts to jam the system's radio channel and triggers an alarm.
Explains the system's monitoring of non-rechargeable battery levels and low battery warnings.
Describes the 4-digit code used for system operation and programming via the Keypad.
Provides a visual example of suggested positions for system components in a property.
Step-by-step guide for opening the remote and inserting the battery.
Instructions for verifying the remote control's functionality using its transmit LED.
Guidance on optimal placement of the keypad for security and accessibility.
Details on mounting the keypad and initial setup procedures.
Advice on optimal external wall placement for visibility, sound, and solar panel exposure.
Steps for installing the siren, including accessing DIP switches and the learn button.
Procedure for connecting batteries and initial power-up, including DIP switch settings.
Notes on placing the siren in Service Mode before adding new devices for proper communication.
Recommendations for placing PIR detectors to maximize detection range and field of view.
Steps for mounting the PIR detector's rear cover and the detector itself.
Instructions for testing PIR detector functionality using Walk Test mode.
Guidance on placing magnetic detectors on doors and windows for optimal security.
Steps for opening the detector, inserting batteries, and mounting.
Process for removing all linked devices from the siren's memory.
Instructions for switching the siren between Service and Operating modes.
How to arm the alarm system immediately using the remote control or keypad.
How to arm the alarm system with a 15-second entry/exit delay using remote or keypad.
Procedure for disarming the alarm system using the remote control or keypad.
How to trigger an immediate alarm using the Personal Attack button on the remote or keypad.
Explanation of how tampering with devices triggers an alarm, unless in Service Mode.
Information on placing the siren in Service Mode to prevent tamper alarms during maintenance.
Guidance on switching the siren back to Operating Mode after maintenance.
Details low battery indications for various system components and battery replacement advice.
Instructions for cleaning the solar panel and maintaining the siren's battery charge.
General maintenance advice for detectors, remote control, and keypad, focusing on battery replacement.
Specifications for replacement batteries for different system components.
Information on proper disposal of the product and batteries according to WEEE directive.
Troubleshooting steps for when the siren sounds immediately upon arming the system.
Steps to diagnose and resolve false siren activations when the system is disarmed or not triggered.
Troubleshooting issues where the siren fails to respond to detector signals.
Steps to diagnose why the siren is not responding to commands from the remote or keypad.
Troubleshooting common issues with the remote control's LED indicator.
Steps to resolve problems where the keypad is unresponsive or its light is not on.
Guidance on identifying and resolving false alarms triggered by PIR movement detectors.
Troubleshooting why a PIR detector is not sensing movement.
Explains the PIR detector LED flashing during normal operation, indicating low battery.
Steps to diagnose and fix issues with the magnetic door/window detector not functioning.
Troubleshooting causes of false alarms from magnetic door/window detectors.
Explains the LED indicator on the door/window detector and low battery status.
Lists additional accessories available to enhance the alarm system's functionality and security.
Information regarding the company's commitment to continuous product development and specification changes.
Contact information for customer support, installation advice, and general product inquiries.
General| Brand | Response |
|---|---|
| Model | SL2 |
| Category | Security System |
| Language | English |
To Next Page
