16.BUILT-IN FLASH LIGHT
As an added feature,your walkie talkie has a built-in flashlight that
can be used in sending light signals or for your lighting needs with
a button on the right side of the device.
17 Charge The PMR(PIC 02)
In the event you wish to use the unit with rechargeable
battery. You will be requited to use an DC adaptor.
● Install 3.6V “AAA” NI-MH rechargeable battery Pack
into the unit.
● Place the unit into the Charger Base.
● Put the adaptor into the wall outlet and insert the round end
into the Charge Jack on the rear of the charger base.
● The LEDlight on Charger Base will turn RED once
electricity get connected.
11
To Next Page
Loading...
