BEFORE USE (Pic 02)
To insert batteries into the devices, first remove the belt attach-
ment: lift the attachment clip (20) and press the belt attachment
upwards. Release the Battery compartment cover latch (21) lo-
cated on the rear side of the unit. Open the battery compartment
(23) and insert 3 AAA batteries or NI-MH rechargeable batteries
(22)(not supplied), ensuring that the poles are correctly aligned.
Then close the lid.
USING THE TWINTALKER
1. Turning the device on/off: To turn the devices on or off, press
the on/off button (13) for 3 seconds, there will be a BEEP sound
to confirm.
2. Adjusting the volume: To increase the volume, press the Up
adjustor button ▲ (7) and press the Down ▼ (8) button to de-
crease volume.
Note: The volume level (5) is displayed on the screen.
3. Battery Charge Level/Low Battery Indication
The battery charge level is indicated by the number of squares
present inside the battery icon on the LCD Screen.
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
When the battery power is low, the battery icon will flash and there
will be a beep indicating that the batteries need to be replaced or
recharged.
5
To Next Page
Loading...
