Retrax EQ Installation Sheet

1
2
3
4
5
6
7
8
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
INSTALLATION SHEET
Any damaged or missing parts?
Parts will be shipped to you directly.
Call 800-206-4070 Mon - Fri, 8:30 a.m. - 5:00 p.m. CST
or email retrax@retrax.com
5-Button Keypad Guide
4000-151 Rev. 6-26-23
The 5-button keypad is designed to be
placed on the outside of the driver’s
side pillar, rear of cabin.
Retrax • 917 S. 46th St., Grand Forks, ND 58201 • 800-206-4070 © Retrax is Retrax Holdings, LLC, 2023
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
0
PARTS INCLUDED IN YOUR KIT
1 EQ keypad
1 Access code card
TOOLS REQUIRED
•
Isopropyl alcohol
1
2
3
4
5
6
7
8
9
0
CABIN MODULE
•
Mentioned but only included
with cover.
A
A
A
B
C
B
To mount the keypad:
1. Clean and prep the installation area
with an isopropyl alcohol-based solution.
2. Allow the surface to dry completely before
placing the keypad on the pillar.
3. Remove the red plastic backing from the
adhesive pad on the rear of the keypad.
Firmly press for 60 seconds to ensure
proper adhesion to the vehicle.
21
To program the keypad:
1. Set the cabin module to pairing mode. (Before proceeding you must:
1. Unlock the vehicle using the factory remote. 2. Enter the vehicle. 3. Close
all doors. Then follow these steps within one minute: Turn IGN ON. Open
and close the door. Press and hold the brake. Open the door. Release the
brake.)
2. On the keypad, enter conguration mode by simultaneously pressing buttons
1/2, 3/4, and 9/0 (A) for at least 2 seconds. Backlight LED (B) will ash three
times.
3. Enter the master code. The backlight and green LED (B) will ash slowly two
times and then turn o.
4. Within 20 seconds, press and hold the 5/6 button (C) until the backlight LED
ashes rapidly and the cabin module unlocks the vehicle, conrming pairing
has been successful.
Important! If pairing fails,
wait for the LEDs to
turn o. Then, repeat
steps 2 and 3, and at
step 4 press and hold
7/8 until the LED
ashes rapidly.
Finally, you can
repeat steps 1-4.

Retrax EQ Specifications

General

Brand	Retrax
Model	EQ
Category	Automobile Accessories
Language	English