To Next Page
C
Curtis TaylorAug 7, 2025
Why do Retrax Automobile Accessories covers need adjustment?
- NNathaniel NixonAug 7, 2025
Covers used frequently or exposed to vibration and impacts from rough roads may require adjustment.
Why do Retrax Automobile Accessories covers need adjustment?
Covers used frequently or exposed to vibration and impacts from rough roads may require adjustment.
What to do if towing from the rear is required with Retrax Automobile Accessories cover?
If towing from the rear becomes necessary, the cover MUST be removed from the vehicle and stored properly.
How to create a better seal between the Retrax Automobile Accessories cover and tailgate?
To improve the seal between the cover and the tailgate, back out the set screws. Ensure you move each set screw the same amount. For instance, to bring the cover 1/8” (3.2 mm) closer, back each set screw out 2.5 revolutions.
What happens if I don't follow Retrax Automobile Accessories care instructions?
Failure to adhere to the care and use instructions will void the warranty. Clean only with mild automotive soap and water. Avoid strong chemicals or cleaners. Note that lubrication of the rails or sealed ball bearings will also void the warranty.
What to do before opening Retrax Automobile Accessories cover?
Before opening the cover, ensure it is free of all foreign materials, including snow and ice. Also, do NOT tow your vehicle from the rear with the cover on.
Key fob for cover operation.
Mobile application for cover control via Bluetooth.
Keypad for wireless cover operation.
Application for system setup and configuration.
Controls cover open/close/stop.
Bluetooth control for cover and tailgate.
Bluetooth control for cover and tailgate.
Pairing, FW updates, installation guides.
Safety features to stop cover movement on obstruction.
System provides parking light flashes for diagnostics.
Most installations use plug-and-play T-harnesses.
Includes driver side bed light; passenger light is optional.
Low voltage, high temp, PARK inhibit.
Commands for lock, unlock, open, close, tailgate.
Master passcode, secondary passcode, anti-scan.
Maximum of 7 devices can be paired to the cabin module.
Voltage and temperature limits for operation.
iOS and Android OS version requirements.
Install cabin module and T-harness, check LED status.
Cabin module discoverable by Installer App for flashing.
LED indications after a factory reset.
Step-by-step guide to pair cabin and cover modules.
How to verify if modules are programmed correctly.
Steps to pair user phone or keypad via the app.
Importance and conditions requiring calibration.
How the cover calibrates its travel limits.
Reset cover module, re-pair, delete/add on app, re-pair keypad.
Pair new cover module, re-pair app. No keypad changes needed.
Steps to perform a factory reset on the cabin module.
What happens after a successful factory reset (unpairing).
Interpreting flash counts for diagnostics.
How the system connects to the truck.
How the phone app connects and operates the cover.
Information on self-installation.
Number of devices that can be paired.
Compatibility with other truck electronics.
Anti-pinch and anti-snag behavior.
Feature for securing cargo by stopping on resistance.
Maximum weight the cover can support.
Considerations for aftermarket remote starters.
No Apple CarPlay support for cover operation.
iPads can be used for the apps.
No smartwatch companion apps available.
Bluetooth range specifications.
General| Brand | Retrax |
|---|---|
| Model | EQ |
| Category | Automobile Accessories |
| Language | English |
