Retrax EQ - Replacing Cabin Module (DS4 TH); Cabin Module Replacement Steps; Replacing Cover Module; Cover Module Replacement Steps

28 29
REPLACING CABIN MODULE (DS4TH)
Set the Cover module to Factory Reset
rst, then re-pair this module with the
new Cabin module
Delete the Vehicle on the APP, then add
the new Cabin module
Enter to Congure mode to erase the
pairing, then re-pair the keypad with the
new Cabin module
REPLACING COVER MODULE
Pair the new Cover module to the
Cabin module
Re-pair the APP to register the new
Cover module
No changes required