4
Television settings
To complete the set up, THEA500 Mini will ask you to choose the video
output requirement of your television, either 50 Hz output or 60 Hz output.
Move the selector to the required video output mode and select it by
pressing A.
Tip: Most of the built in games were developed in Europe where 50 Hz was
common, so it is best to choose the 50 Hz output, if your TV supports it.
Otherwise 60 Hz output will work just ne, as THEA500 Mini employs some
clever techniques to manage the output dierence. If you are not sure if
your TV supports 50 Hz, THEA500 Mini will test this before continuing.
Before you can proceed, you must test and conrm that your TV will work
with the chosen video output mode by pressing X. THEA500 Mini will
perform the test by switching to the chosen video output mode for 20
seconds. When the test starts you may see your TV screen go blank for a few
seconds.
If your TV successfully resumes displaying the Television settings menu with
the new mode selected, press Y to accept the mode. If the video test is not
successful, identied by whether or not you can clearly see the Television
settings menu during the test, wait until the test completes and THEA500 Mini
will revert to the previous output mode.
To Next Page
Loading...