Retro Games THEA500 MINI - Assigning Joystick Actions

26
To edit the primary action map, press A. To edit the secondary action map,
press R+A.
Note: When the secondary action map is edited, any action on the R
button on the primary action map will be overwritten with the Secondary
controls action. If this is subsequently edited to become any other action,
the secondary controls will not be accessible during game play.
When you start editing the map you are rst shown the group of Joystick
actions to choose from, represented as a labelled diagram of a joystick. This
diagram will change as you cycle through the other action groups of Joystick,
Keyboard, CD32 pad, Mouse and Special by pressing L.
Assigning joystick actions
While editing, THEA500 Mini positions a light blue indicator over
THEGAMEPAD button currently being assigned. For this button:
● To change the assigned action, use 5 to select the joystick action you
want to assign and press A
● To keep the assigned action, press Y
● To clear the assigned action (leaving that button unassigned), press X
● To make a selection from a dierent action group, press L
Once an assignment is made, cleared, or skipped, THEA500 Mini will move
the blue indicator to the next button, where you repeat the process until all
buttons have been assigned, cleared, or skipped.
When assigning Joystick actions, pressing L will switch to the group of
Keyboard actions.