16
Enable 50 Hz output /
Enable 60 Hz output
Choose THEA500 Mini’s HDMI video output
frequency. Most of the built in games were
developed in Europe where 50 Hz was common, so
it is best to choose 50 Hz output if your TV supports
it. Otherwise 60 Hz will work ne.
If you change the output mode you will need to
perform a TV test by pressing X. When activated,
THEA500 Mini will change to the new output mode
for 20 seconds.
If the image is visible during the TV test, press Y
to accept the new mode. If not (for example, if all
that is displayed is a black screen) wait until the test
has completed and THEA500 Mini will revert to the
previous output mode.
If you have chosen a new output mode, THEA500
Mini will not allow you to close this menu until you
test and accept it.
Use screen edges Enable this option if your television can display a full
720p image without cropping. Disable this option if
you nd the edges of the image are being clipped
o. This is enabled by default.
System information
This shows THEA500 Mini’s current rmware build, and will also allow you to
upgrade to a newer rmware build if one is present on an inserted USB stick
(see "Updating the rmware" on page 29).
Legal notices
This option displays legal notices relevant to THEA500 Mini. The text may be
scrolled up and down using |.
Factory reset
This will reset all settings to their default values and erase all saved games
for the 25 installed games. This function can also be initiated by holding the
power button down while THEA500 Mini powers on.
A factory reset will not revert any rmware upgrades, nor will this erase the
Saved game slots and settings for user supplied programs held on USB stick.
To Next Page
Loading...