RetroTINK 5X Pro - Specifications; Input Connections; Input Resolutions; Output Resolutions

!
Introduction
The RetroTINK-5X (RT5X) is an advanced video scaler for connecting retro consoles to
modern HDTVs. Multiple input options: component, SCART RGB, composite and S-video are
accepted. The standard definition processor in the RT5X is capable of decoding NTSC, PAL
and PAL-60 formats. The component and RGB ports can digitize analog high definition video
up to 720p and 1080i. The custom scaler engine is implemented on a FPGA, enabling low-lag
operation with outputs up to 1440p.
Specifications
a
Due to chipset limitations, 720p and 1080i input resolutions are sampled at 4:2:2. All others
are oversampled to achieve the equivalent of 4:4:4 chroma resolution or greater at the base
sampling rate.
Input Connections
YPbPr, Y/C, CVBS, SCART (CVBS and RGB), Stereo Audio
Output Connection
Digital Video Connection
Input Resolutions
240p, 288p, 480i, 576i, 480p, 576p, 720p
a
, 1080i
a
Encoded Standards
NTSC, PAL, PAL-60 (PAL-M, PAL-N, NTSC-443, SECAM enabled but
untested)
Deinterlacer Modes
Motion Adaptive, Weave, Blend, Bob, Linear and CRT Simulation
Output Resolutions
240p, 480p, 720p, 768p, 1080p, 1200p, 1440p
Latency
Approx. 0.25 frames in frame lock, 0.25 to 1.25 in triple buffered mode
Power
< 800 mA over microUSB
Copyright RetroTINK LLC 2021
All Rights Reserved
Page of 2 13