Need help?Do you have a question about the Rev Electrix Cellpro 10XP and is the answer not in the manual?
General| Output Current | 10A |
|---|---|
| Weight | 1.2 kg |
| Charge Power | 100W |
| Max Charge Current | 10A |
| Input Voltage | 11 - 18V |
| Battery Types Supported | LiPo, LiFe, LiIon, NiMH, NiCd, Pb |
| Number of Cells | 1-10 LiPo/LiFe/LiIon/A123, 1-24 NiCd/NiMH, 1-12 Pb (2-24V) |
| Discharge Power | 50W |
| Max Discharge Current | 5A |
| Balancing Current | 300mA |
| Balance Port Current | 300mA |
| Cooling | Fan |
| Input Current | 10A |
Compares automatic and manual charge rate settings and their implications for battery charging.
Explains how to limit input current and set low voltage limits for power supply protection.
Covers essential rules for connecting single/dual packs, mixed chemistries, and adapter usage.
Details the functions of the MODE and START/STOP buttons and their combinations.
Step-by-step guide on how to choose a preset from the charger's menu.
Instructions on how to modify charge parameters for existing presets.
Guides on how to install the Cellpro 10XP Charge Control Software.
To Next Page