Reverso FPS-210 User Manual

18
Reverso Pumps, Inc.
FPS-210 Technical Specications
Nominal Flow Rate System rated at 210 GPH (795 LPH). Actual ow rate may vary due to conditions of installation.
Voltage 120V AC 60Hz single phase or 220V AC 50Hz single phase
Circuit Breaker
10A / 120V AC
10A / 220V AC
Pump Type Gear
Pump Body N/A
Pump Shaft Stainless steel
Pump Rating IP55
Self-priming 4.9 ft
(1.5m) with foot valve above liquid level
Control Digital, Touchscreen, or Mechanical
Inlet / Outlet 3/4” Male JIC
Recommended
Hose
Minimum 3/4” inner diamter (ID) using quality approved fuel line materials
Filter Torque Values
Bowl Screws 8 Nm (70.8 in-lbs)
Lid 8 Nm (70.8 in-lbs)
Bleed Screw 4 Nm (35.4 in-lbs)
Spare Parts
Part # Description
59-01810 Separ 01810, 10 micron element
59-01830 Separ 01830, 30 micron element
59-01860 Separ 01860S, 60 micron element, stainless
65-30421 Separ lid gasket
65-30423 Separ bowl gasket
05-0839 Vacuum gauge

Reverso FPS-210 Specifications

General

Brand	Reverso
Model	FPS-210
Category	Control Unit
Language	English