Revitive CIRCULATION BOOSTER ESSENTIAL - Warnings

14
15
e Press the power button on the Revitive.
You will hear a beep and the display lights will light up.
The time will read 30 minutes and Intensity will
read 00.
To turn o the device at any time during operation, press
the power button.
f Press the (+) Intensity Control one time to
start stimulation.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
g Ensure you familiarize yourself with the feeling of
Electrical Muscle Stimulation (EMS). Use on a low
intensity for 30-60 minutes once per day for a few days.
Set the intensity at a level where you can feel the
stimulation in your feet and which creates a calf
contraction.
It is normal to feel tingling or varying sensations in
your calf muscles.
Revitive does not vibrate.
h Aer a few days of familiarization, use a higher intensity
that provides you with strong but comfortable calf
muscle contractions.
Most people experience a strong contraction at intensity
level 40 or over. You can set the intensity between
1-50.
Please note that the intensity required may vary from
day to day.
R
R
R
R
If you feel pain or discomfort:
• Remove one or both feet from the foot-pads to
stop the stimulation.
• Lower the intensity of the foot-pads using the
(–) Intensity level button on the control panel
before replacing your feet on Revitive.
i The Time Display will start to count down in minutes as
Revitive cycles through its program.
j When Revitive times out, the Time Display reads 00 and
you will hear three beeps.
k The Revitive switches itself o automatically.
EN
Instructions for use
5827_IFU04_17963935.indd 14-15
5827_IFU04_17963935.indd 14-15
09/04/2021 13:23
09/04/2021 13:23