25
STEP 6:
CLEANING AND STORING REVITIVE
a Press the power button and turn REVITIVE off, if needed.
b Wipe down the foot pads with a soft damp cloth.
Do not clean with chemicals.
Do not immerse REVITIVE in water.
c Store REVITIVE in a cool, dry and dust-free location.
Store out of direct sunlight.
d Place body pads on the body pad holders.
e Store the body pads in a dry and ventilated location.
Store out of direct sunlight.
You do not have to detach the body pads from the body pad cords to store
them.
Replacing the Batteries
The remote control requires two AAA alkaline 1.5V batteries to operate. Follow
Steps 1, c-f on page 12 for guidance on inserting batteries.
Replacing the Body Pads
The body pads are reusable up to 20-30 applications. If the body pads start to
lose their adhesiveness, rub a few drops of water into the surface. Replacement
body pads can be obtained via www.revitive.com
About the REVITIVE Remote Control
The technology used in the remote control allows an emitted infrared signal
to be sent to the REVITIVE unit. Infrared is a common and reliable technology
within remote control devices. The signal is a binary-coded command that
is unidirectional and low speed. This instructs the microprocessor within the
REVITIVE to change specific functions. The remote control must be aimed
directly at the REVITIVE with no obstacles in between. The remote control
does not change function itself but simply communicates commands to the
REVITIVE.
1718_IFU01_7244012.indd 25 27/03/2015 10:04
To Next Page
Loading...