ReVIVE SMART SCALE - Downloading the Revive App; New User Setup Procedure; Steps for New User Setup; Existing User Setup Procedure

!
©2017 ADURO, Inc. All rights reserved. V011817
5!
Android:
• Go to Settings through app menu
• Open application drawer
• Find settings app
• Click on Bluetooth™
• Make sure that the toggle for Bluetooth™ is turned on
Download the Revive app (if necessary):
iOS:
• Search ‘Revive’ in App Store (version 1.6.0 or greater)
• Once app is located, select ‘Get’ to download
Android:
• Search ‘Revive’ in Google Play Store (version 1.6.0 or greater)
• Once app is located, select ‘Install’ to download
New User Set Up
Open the Revive app and:
1. Select ‘New user? Get started’ from the main screen.
2. Select ‘Next’ in the upper right corner to get through the start screens.
3. On the ‘Connect a device’ screen, tap the blue ‘Add’ button next to the scale icon.
4. The app will then prompt you to stand on the scale, please do so when prompted.
5. You should see the Bluetooth™ symbol in the upper left hand corner of the scale above your weight. The app
will then ask if you see it and if you do tap ‘Yes’. If you do not see it, select ‘No’ and try adding the scale again.
6. When the scale is being added, you will see a ‘syncing scale’ notification appear in a blue bar.
7. Once the scale has been added, you will see a ‘scale added’ notification appear in a green bar.
8. After the scale has been added, select the arrow in the upper right hand corner to begin creating your
account.
Existing User Set Up
Open the Revive app and:
1. Tap the main menu (three bar icon) in the upper right hand corner of the Dashboard.
2. Select ‘Devices’.
3. Tap the blue ‘Add’ button next to the scale icon.
4. The app will then prompt you to stand on the scale, please do so when prompted.
5. You should see the Bluetooth™ symbol in the upper left hand corner of the scale above your weight. The app
will then ask if you see it and if you do tap ‘Yes’. If you do not see it, select ‘No’ and try adding the scale again.
6. When the scale is being added, you will see a ‘syncing scale’ notification appear in a blue bar.
7. Once the scale has been added, you will see a ‘scale added’ notification appear in a green bar.
8. After adding the scale, step off and allow it to reset before weighing yourself.