About PowerLab Touch Battery Workstations
Decades in the making, the new PowerLab Touch series of Battery Workstations from Revolectrix
combines the amazing POWER, RELIABILITY, FLEXIBILITY, and INTUITIVE OPERATION of
the original Cellpro PowerLab series with integrated BUMP Technology (for more about BUMP
Technology, see below). Countless hours of Research and Development, refining and improving
legacy hardware, writing new firmware and software, as well as a six-month beta test program,
has resulted in four new and amazing PowerLab models; PowerLab 6 Touch, Dual PowerLab 6
Touch, PowerLab 8 Touch, and Dual PowerLab 8 Touch. These flagship products represent the
best REVO has to offer; 6s or 8s capable, Multi-Chemistry, Single or Dual Channel Charging
"engines" based on time-proven reliable power circuit designs, married to a powerful, color touch
LCD user interface; the best of what the original BUMP Controller has to offer, including NFC
BUMPTag operation, Preset, or Manual Control of all Battery Management functions; on-screen
real-time monitoring of all important data, integrated USB, and integrated Bluetooth 4LE for
Android and iOS Devices.
About BUMP Technology
BUMP is an exclusive Revolectrix concept for Battery Management. BUMP technology utilizes
Near Field Communication (NFC) technology to communicate with any battery equipped with a
BUMP Compliant Tag, or “BumpTag”. BumpTags are pre-installed and pre-configured on most
Revolectrix batteries, but are also available separately, so a customer can configure them for use
with any battery of his choosing. Once a BumpTag is programmed for a given battery, a simple
“BUMP” of the battery on a Revolectrix BUMP-compliant charger or controller and it is ready to
charge. The Revolectrix PowerLab Touch chargers have BUMP support built in, while BUMP
support may be added to any legacy (or up to 4 of legacy) Cellpro PowerLab Battery Workstations
by connecting a BUMP Controller which takes complete control of the PowerLab Workstations.
Unlike conventional methods of battery maintenance which require adjusting settings for every
operation, with BUMP technology, packs only need to be configured one time – when the
BumpTag is configured, then…
Charging is as simple as BUMP, CONNECT, and GO !
To Next Page
Loading...
Need help?
General
