Revolectrix PowerLab 6 Touch User Manual

PowerLab Touch Series Battery Workstations
User’s Guide
BUMP Firmware v4.06 and later
APPLIES TO THE FOLLOWING MODELS:
POWERLAB 6 TOUCH (PN: LC06S40AT-MC)
DUAL POWERLAB 6 TOUCH (PN: LC06S40ATDIC-MC)
POWERLAB 8 TOUCH (PN: LC08S40AT-MC)
DUAL POWERLAB 8 TOUCH (PN: LC08S40ATDIC-MC)
© 2015, 2016, 2017 FMA,Inc.
Updated: 12/18/2017

Revolectrix PowerLab 6 Touch Specifications

General

Brand	Revolectrix
Model	PowerLab 6 Touch
Category	Battery Charger
Language	English

Summary

PowerLab Touch Battery Workstation Features

Cabling and Installation – The Basics

Connecting External CellPro PowerLabs

Configuring CellPro PowerLabs for BUMP Control

Connecting Packs

Operation – Overview of User Interface

Status Screen - Charger Tabs

Explains the main status screen, charger tabs, and basic navigation.

Operation – Battery Workstation Setup

Operation – Using BumpTags

Accurate, Normal, and Fast Charge

Operation – Using Battery Presets

Operation – Using Manual Operation

Settings

Power Supply Configuration

Select and configure power supply profiles for optimal charger operation.

Feature and Port Controls

Enable/configure features, ports, and adjust analysis warnings.

Settings – Power Supplies

Basic Setup: Single Power Supply for all connected PowerLabs

Settings – Feature Controls

History and Setup Features

Enable/configure history upload, presets, favorites, and multi-pack setup.

BumpTag Installation

BumpTag attached directly to the battery

Attaching BumpTag directly to battery for unique ID and easy alignment.

BumpTag Configuration

Factory Ratings

Sets hard limits for battery capabilities (write-once) and includes safety notes.

Standard Battery Ratings

Defines essential battery ratings like Chemistry, Cells, Capacity, and Pack Max C-rating.

Advanced Battery Ratings

Multi-Pack Batteries

BumpTag User Settings

Charge and Discharge Settings

Operation and History Settings

BumpTag Analysis Data

Upgrading Firmware

PC Firmware Update Utility

Utility for updating firmware via USB connection to a PC.

Revolectrix CCS Mobile App

Enabling Battery History Upload to CCS App

Troubleshooting

'Lost Data Link' Symptom and Solutions

White Screen on Power-Up Symptom and Solutions

Support Options

REVOLECTRIX Limited Warranty

Warranty Exclusions and Limitations

Details warranty limitations, exclusions for misuse, accidents, and improper installation.