Need help?Do you have a question about the Revolectrix Dual PowerLab 8x2 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| PC Connectivity | USB |
| Output Power | 2000W total (1000W per channel) |
| Charge Current | 40A per channel |
| Battery Types Supported | LiPo, LiFe, LiIon, NiMH, NiCd, Pb |
| Display | LCD |
| Cooling | Dual Fan |
Instructions for connecting battery packs using basic wiring methods.
Basic one-pack charging setup using balance and discharge wires.
Parallel charging setup for multiple packs using Safe Parallel Adapters.
Parallel charging for split packs (10s or larger) with a center tap.
Two DPL channels charging separate packs in Expansion Channel Mode.
Steps to change parameters and screens within a User Preset directly.
Tools for clearing and copying User Presets on the device.
Instructions for downloading and installing the Charge Control Software.
Monitor charge/discharge data, select presets, and start/stop operations.
Step-by-step guide to updating the device's firmware version.
Detailed steps to modify parameters and screens within a User Preset.
Understanding how CCS checks custom presets for validity and safety rules.
Steps to change the balance connector wiring mode directly on the DPL.
Steps to change wiring mode via the Charge Control Software.
Diagrams showing FMA wiring for various battery pack configurations.
Diagrams showing XH/EH wiring for various battery pack configurations.
Table listing safety codes/messages and their corresponding problems.
To Next Page
