Revolectrix Dual PowerLab 8x2 - Configuration B: Parallel Charging

16
Configuration B
Summary: parallel charging.
Components:
 1 Dual PowerLab 8x2
 1 power source
 1 Safe Parallel Adapter for each pack (do not use standard adapters), or MPA
 2 or more packs (above 16 packs in parallel, you are responsible for determining
the charge/discharge current for each pack) 
 Optional FUIM3 for computer support 
Dual PowerLab 8x2 mode (Normal or Expansion Channel): Normal.
Dual PowerLab 8x2 maximum charge power: up to 672W charge to each of two
packs charged in parallel using 40VDC/1700W power source.
Constraints:
 1 pack per adapter (unless using MPA)
 Check pack polarity.
 Same cell count for all packs.
 Use discharge leads (unless using MPA)
(Illustration next page)