LUBRICATING THE DRIVE CHAIN
The driving chain on your Revvi must be kept lubricated often to
avoid excessive wear. To lubricate the drive chain, follow the steps
below:
1. Park the bike on a level flat surface using the kickstand.
2. Lean the bike toward the kickstand so that the rear wheel
comes off the ground an inch or two.
3. As you rotate the rear tire, wipe down the chain with a clean
cloth to remove as much grime and build up as possible.
4. Spin the wheel and apply chain lube. You may need another
person to help you do this.
NOTE: The chain should be thoroughly lubricated but without
buildup of lube, which can collect dirt and grit which causes
damage to the chain.
To Next Page
Loading...