16
= Turn engine off („Kill-Switch“)
= Engine on
= Low beam
= Position light, front & rear
= Headlights off (Daytime running lights activated), front
= Start Button, activated Ignition /Starter /deactivated Ignition
Switching unit right
Multifunction switch on handlebar
= passing Light
= High beam
= Low beam
= Turn signal left
= Turn signal right
OFF
= Push to turn of turn signal
= Horn
= Hazard warning
Switching unit left
To flash in a desired direction, you must briefly press the switch in the desired direction. To stop the flashing, press the center of the switch forward.
Only operate the turn signal when you want to change lanes or turn. Always switch off the turn signal when you have completed this maneuver.
Functions and settings
To Next Page
Loading...
