15
Set time
1. Switch on the ignition and the display lights up
2. Briefly press the MENU / << button.
3. Briefly press the MEM / OK button
4. Press the >>> button 3 times briefly until the hour appears in red
letters (GPS time must be set)
5. Press the MEM / OK button briefly to toggle between date and
hour
6. Press the MENU / <<< button briefly and the minute display
appears in red letters
7. Press the MENU / <<< button briefly and the minute will be
highlighted in red font
8. Use the MENU / <<< and >>> keys to set the time
9. After setting, press MEM / OK briefly To return to the previous
digit, press >> briefly.
10. To set the subsequent digits 6 and 7
11. When you have finished setting the time, briefly press VIEW /
QUIT to exit the display.
Set date
1. Switch on the ignition and the display lights up
2. Briefly press the MENU / << button.
3. Briefly press the MEM / OK button
4. Press the >>> button 3 times briefly until the hour appears in red
letters (GPS time must be deactivated)
5. Press the MEM / OK button briefly to toggle between date and
hour
6. Press the MENU / <<< button briefly and the year is displayed in
red letters
7. Press the MENU / <<< button briefly and the year will be
highlighted in red
8. Set with the MENU / <<< and >>> keys
9. After setting, press MEM / OK briefly To return to the previous
digit, press >> briefly
LCD display settings
11. To set follow point 6 & 7
12. When you have finished setting the date, briefly press VIEW / QUIT to exit
Change between rpm and speedometer
1. Switch on the ignition and the display lights up.
2. Briefly press >>> to switch between RPM and MPH
Reset trip meter
1. Switch on the ignition and the display lights up
2. Briefly press the MENU / << button
3. Press >>> key 3 times briefly until you reach the 4th menu item
4. Press MEM / OK key briefly
5. The display shows USr1: in red letters
6. Briefly press the MEM / OK key
7. Briefly press the >>> key. The display shows CLEAR in red letters
8. Briefly press the MEM / OK key and the display US1: changes to 0 miles
9. Briefly press the VIEW / QUIT key to exit
Time and date display with LCD instruments
The date is located on the right above the blinker light, and the time is located on
the left above the blinker light.
T
To Next Page
Loading...
