44
If the temperature rises into the red range and does not drop again even after braking, you should allow
the vehicle to cool down and check the coolant level (see page 39). To do this, park the vehicle safely to
avoid damage to the engine and contact a rewaco partner if necessary.
If the motor temperature reaches pos. 4, the color of the thermometer symbol changes to red and a
continuous beep sounds. In this case, you must immediately reduce the engine power! You should allow
the vehicle to cool down and check the coolant level (see page 39). To do this, park the vehicle safely to
avoid damage to the engine and contact a rewaco partner if necessary.
Engine temperature
The engine has its operating temperature when the pointer of the display has reached the upper blue scale (70°C / 158°F - Pos.1). The color of the thermometer
symbol changes from white to yellow when the temperature reaches 90°C / 194°F (pos. 2). At this point, no direct intervention is required. However, you should
keep an eye on the temperature. Under heavy engine load and high outside temperatures, the operating temperature may also briefly rise into the red range
(pos. 3). This is not dangerous. In this case, you must reduce the engine power and/or unload the vehicle until the engine temperature drops below the red
range.
Engine temperature display
1
3
4
2
Do not open the lid of the coolant expansion tank when the engine is hot - risk of scalding!
Faults and malfunctions
Faults and malfunctions
Check your trike for roadworthiness before each ride. Check that the brakes, gearshift, handlebars, tire pressure, fuel and oil levels, etc. are in good working
order.
As soon as you notice a defect, park the trike in a safe place and contact a rewaco dealer.
To Next Page
Loading...
