18
1. To be able to start the trike, gear "P" must be engaged.
2. Briefly press the green button on the hand-held transmitter (LED flashes slowly for confirmation).
3. Briefly press the button on the hand-held transmitter (LED flashes quickly to confirm).
4. Now briefly press the start button on the right-hand switch combination; the ignition is activated, and the LCD instrument panel switches
on with a short delay. (The ignition of the vehicle is now switched on!).
5. The LCD display is activated, now the trike is ready to start the engine.
6. Make sure the “Kill-Switch” is in the "ON" position.
7. Depress the brake pedal firmly - while the brake pedal is depressed, press the start button briefly - the engine will start! If the brake pedal
is not pressed, switch off the ignition; in this case the ignition is switched off; repeat the procedure!
8. Now the desired driving stage can be selected.
Switching on the ignition and starting the engine - Radio key variant with LCD display
T
Functions and settings
To Next Page
Loading...
