EasyManua.ls Logo

REXENER PR-200 - Technical Information

REXENER PR-200
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
TECHNICAL INFORMATION
EN 303-1 7.2result
the required draught in mbar0.04 mbar
gas side resistance and combustion chamber pressure
for boilers operating with positive pressure in mbar
0.14 mbar
exit flue gas temperature in ℃140 ℃
exit flue gas mass flow in kg/s0.0088 kg/s
emissions of nitrogen oxides NOx in mg/kWh119 mg/kWh
exit flue connection diameter in mm75 mm
water resistance in mbar
20K - 60 mbar
10K - 80 mbar
maximum heat input in kW
19.6 kW
nominal heat output in kW18.5 kW
30 % nominal heat output in kW5.6 kW
useful efficiency at rated heat output and high
temperature regime in %
96 %
useful efficiency at 30 % of rated heat output and high
temperature regime in %
98 %
standby heat loss in kW0.089 kW
auxiliary electricity
consumption
at full load75 W
at part load40 W
in standby mode6 W
gas volume of the boiler in ㎥0.023 ㎥
range of temperature control in ℃(0 ~ 45) ℃
fuel typeDiesel
combustion chamber typeForced Exhaust
the combustion chamber dimensions and the
combustion chamber volume
0.015 ㎥
direct flame operation or flame reversalDirect flame
boiler type: ON/OFF, modulating, multi stageON/OFF