INSTALLATION/ COMMISSIONING/SERVICING
®
Please read this document carefully before commencing installation, commissioning and/or servicing.
Leave it with the end user/site agent to be placed in their premises technical file after installation.
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death.
All work must be carried out by appropriately qualified persons.
The manufacturer does not take any responsibility in the event of non-observance of the regulations concerning the connection of the apparatus causing a dan-
gerous operation possibly resulting in damage to the apparatus and/or environment in which the unit is installed.
RHC DJL 4000
Manual Part No. D301155 Issue C
EU)2016/426(GAR),2009/125/EC(ErP), 2014/35/EU(LVD),and2014/30/EU(EMC)
Regulations and Directives.
The following harmonised standards have been applied:
EN 1020, EN 60335-1, EN 60335-2-102, EN 55014-1, and EN 55014-2
GAS-FIRED POWER VENTED UNIT HEATER
To Next Page
Need help?
General
