RFXCOM RFXtrx433 - 2 Rfxtrx433 RF Transceiver General Information; Supported Protocols

Copyright 2011-2012, RFXCOM RFXtrx Version 2.12 page 3 / 20
2. RFXtrx433 RF transceiver general information
The RFXtrx433 transceiver is communicating over one USB port with the application.
The RFXtrx433 enters for 2 seconds the boot loader and after this it starts the receive/transmit
firmware.
For developers, the communication protocols over USB are described in the SDK.
2.1. Supported protocols
It supports a number of RF protocols in flash memory so that it can easily be upgraded by the
user.
Protocol receive
transmit
X10 lighting X10, Xdom, ebode Y Y
X10 security Y Y
ARC (address code wheels)
HomeEasy, KlikAanKlikUit, ByeByeStandBy, Intertechno, ELRO, AB600, Düwi, DomiaLite, COCO
Y Y
ELRO AB400D, Flamingo, Impuls, Phenix, Sartano - Y
Chacon EMW200 - Y
Waveman - Y
Impuls - Y
AC (learning button) HomeEasy UK, KlikAanKlikUit, Chacon, NEXA,DI.O,Intertechno Y Y
HomeEasy EU Y Y
ANSLUT Y Y
Ikea Koppla - Y
AD LightwaveRF, Siemens Y Y
Digimax Y -
RTS10 / RFS10 / TLX1206 - Y
HE105 - Y
Mertik Maxitrol Y Y
X10 Ninja/Robocam Y Y
La Crosse TX2, TX3, TX4, TX7, TX17 Y -
TFA TS15C, TS34C Y -
Oregon 1.0 THR128,THR138,THC138 Y -
Oregon 2.1 / Huger
THC238/268,THN122N/132N,THWR288A,THRN122N,AW129,AW131,THGN122N/123N,
THGR122NX,THGR228N,THGR238/268,RTGR328N, THGR328N, THGR918, THGRN228NX,
THGN500,BTHR918,BTHR918N,BTHR968, RGR126,RGR682,RGR918,
STR918,WGR918, UVN128,UV138, RTGR328N
Y -
Oregon 3.0 THGR810,WTGR800,PCR800,WTGR800,WGR800,UVN800 Y -
Oregon BWR101/BWR102 Y -
Oregon GR101 Y -
OWL CM113, cent-a-meter, Electrisave Y -
OWL CM119 / CM160 Y -
UPM/Esic WT260,WT260H,WT440H,WT450,WT450H,WDS500,RG700 Y -
Viking 02811 Y -
KD101 smoke detector Y Y
Harrison curtain - Y
RollerTrol *receive only with all other protocols disabled. Y* Y
ATI Remote Wonder Y Y
ATI Remote Wonder II Y Y
PC Remote Y Y
RFXSensor Y -
RFXMeter Y -
RC5 (IR) - planned