What to do if the relief valve is producing popping noise or draining in my Rheem Water Heater?
If the relief valve on your Rheem Water Heater is producing a popping noise or draining, it indicates a pressure build-up due to thermal expansion in a closed system. This is not normal and needs to be addressed. Contact your water supplier or a plumbing contractor to correct this issue. Important: Do not plug the relief valve outlet.
Why does my Rheem 50, 85, 105 gallon Water Heater make a rumbling noise upon start-up?
The rumbling noise upon start-up of your Rheem Water Heater is a normal occurrence due to the settling of internal components. No action is required.
Specific safety bracing mandates for installations in California.
Fundamental safety rules for handling and using the storage tank.
Proper installation and connection of the T&P relief valve.
Connecting water lines to the top ports of the storage tank.
Illustrative guide showing standard component placement for installation.
Factors to consider when choosing a suitable placement for the tank.
Details on the sidewall connection ports and their usage.
General| Category | Water Heater |
|---|---|
| Model | Rheem 50, 85, 105 gallon |
| Tank Capacity | 50, 85, 105 gallons |
| Energy Source | Electric, Gas |
| First Hour Rating | Varies by model |
| Warranty | Varies by model |
To Next Page