37
Replacement Parts
For 40, 50, 65, and 75 Gallon Models equipped for use with Natural or Liquified Petroleum/LP gas.
Instructions For Placing a Parts Order
All parts orders should include:
The model and serial number of the
water heater from the rating plate.
Specify type of gas (Natural or
Liquified Petroleum/LP gas)
as marked on the rating plate.
Part description (as noted below) and
number of parts desired.
Refer to page 40.
CAUTION: For your safety, DO
NOT attempt repair of gas piping,
gas control (thermostat), burners,
vent connectors or other safety devices.
Refer repairs to qualified service
personnel.
Use only original equipment
replacement parts.
Blower
Assembly
Flue Baffle
Anode Rod
** Heat Trap Nipple
** Heat
Trap
Dip Tube
Dip Tube Gasket
Drain Valve
Temperature and Pressure
Relief Valve
Combination
Gas Control (Thermostat)
*Igniter
*Burner Supply Tube
*Burner
Jacket Door
*Burner Access Door Grommet
*Sight Glass
*Burner Access Door
*Burner Access Door Gasket
*Burner Orifice
*Burner Assembly Kit
The kit provides extra speed clips
and tamper resistant screws.
** May differ in actual appearance.
Flammable Vapor Sensor
Rubber
Coupling
Nipple
Combustion
Air-Inlet
Assembly
To Next Page
Loading...
Need help?
General
