EasyManua.ls Logo

Rheem PowerVent Series User Manual

Rheem PowerVent Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AP15763-2 (01/14)
Printed in USA
®
!
FOR YOUR SAFETY!
Do not store or use gasoline or other
flammable vapours or liquids or other
combustible materials in the vicinity of this or
any other appliance. To do so may result in an
explosion or fire.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not
use any phone in your building.
Immediately call your gas supplier from
a neighbour’s phone. Follow the gas
supplier’s instructions.
If you cannot reach your gas supplier, call the
fire department.
Do not return to your home until authorized
by the gas supplier or fire department.
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, personal injury, or death. Refer to
this manual. Installation and service must be
performed by a qualified installer, service
agency or the gas supplier.
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
!
The purpose of this manual is twofold: one, to provide the installer with the basic
directions and recommendations for the proper installation and adjustment of the
water heater; and two, for the owner–operator, to explain the features, operation,
safety precautions, maintenance and troubleshooting of the water heater. This
manual also includes a parts list.
It is very important that all persons who are expected to install, operate or adjust this
water heater read the instructions carefully so they may understand how to perform
these operations. If you do not understand these instructions or any terms within it,
seek professional assistance.
Any questions regarding the operation, maintenance, service or warranty of this
water heater should be directed to the seller from whom it was purchased. If
additional information is required, refer to the section on “If you need service.”
Do not destroy this manual. Please read carefully and keep in a safe place for
future reference.
!
Recognize this symbol as an indication of Important Safety Information!
Residential 40 and 50 Gallon
Use & Care Manual
With Installation Instructions for the Installer
Water Heaters
Warning: This water heater is not
suitable for use in manufactured (mobile) homes!
Residential Gas - FVIR Certified
!
Model shown with factory installed
optional digital display.

Other manuals for Rheem PowerVent Series

Questions and Answers:

Rheem PowerVent Series Specifications

General IconGeneral
CategoryWater Heater
Fuel TypeNatural Gas or Propane
Vent TypePower Vent
Tank MaterialGlass-lined Steel
Voltage120V
Venting2", 3" PVC or ABS Venting
WeightVaries by model
Input BTU40, 000-76, 000 BTU/hr
Energy Factor0.62-0.70
Warranty6-12 years

Summary

Use & Care Manual and Installation Instructions

Key Safety Warnings

Highlights critical safety information and symbols for user awareness.

Gas Leak Emergency Procedure

Outlines immediate actions to take if a gas leak is detected.

Manual Navigation and Safety Information

Understanding Safety Alert Symbols

Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols.

Critical Safety Information

Flammable Vapor Sensor Functionality

Information on the flammable vapor sensor and its safety role.

Venting and Blower Assembly Safety

Mandates proper installation of the blower and venting system.

Handling Flammable Materials Near Heater

Warnings against storing or using flammable liquids and vapors.

Water Temperature Safety Guidelines

Scald Risk from High Temperatures

Details the relationship between water temperature and burn severity.

Temperature Settings for Vulnerable Users

Recommendations for households with children, elderly, or disabled.

Fuel Gas Safety Procedures

Gas Leak Detection and Response Protocol

Steps to follow if a gas leak is suspected or detected.

General Safety and Operational Precautions

Water Heater Installation Guidelines

Proper Installation Location Requirements

Specifies acceptable and prohibited locations for installation.

Installation Site Considerations

Combustion and Ventilation Air Supply

Ensuring adequate air for combustion and ventilation.

Water Heater Installation Steps

Connecting Water Supply Lines

Instructions for connecting hot and cold water lines.

Installation Procedures and Components

Temperature and Pressure Relief Valve Installation

Proper installation and discharge line routing for the T&P valve.

Gas and High Altitude Installation

Gas Supply Line Requirements and Testing

Details on gas pipe material, pressure, and leak testing.

Venting System Installation

Blower Assembly Mounting and Connection

Instructions for installing the blower assembly.

Venting System Compliance and Inspection

Ensuring the vent system meets standards and inspection requirements.

Vent Pipe Material Specifications

Vent Pipe Length Limitations

Venting System Installation Details

Vent Terminal Clearance Requirements

Vent Terminal Installation Procedures

Water Heater Electrical Wiring

Wiring Configuration and Grounding

Details on connecting power, grounding, and wiring practices.

Optional User Display Wiring

Installing the User Display Module

Optional User Display Installation

User Display Operation: Temperature Settings

Setting Maximum Temperature Limits

How to set and understand temperature limits on the display.

User Display Temperature Limit Interaction

Installation: Heat Traps and Best Practices

Critical Installation Do's and Don'ts

Essential practices to follow and avoid during installation.

Comprehensive Installation Checklist

Potable Water and Space Heating Applications

Initial Operation: Lighting the Water Heater

Pre-Operation Safety Review

Essential safety checks before lighting the appliance.

Operating the Water Heater Safely

Water Heater Temperature Management

Adjusting and Verifying Water Temperature

Guidance on setting and checking the water temperature.

Understanding Scald Risk by Temperature

Table showing time to produce burns at various water temperatures.

Water Heater Operational Sequence

Flammable Vapor Sensor Actions

How the sensor detects vapors and shuts down the heater.

Water Heater Maintenance and Cleaning

Care and Cleaning Procedures

Troubleshooting Common Water Heater Issues

Advanced Troubleshooting Guide

Gas Valve LED Diagnostic Codes

Getting Service and Support

Contacting the Manufacturer for Assistance

Information on who to contact for service and required details.

Related product manuals