Rheem Raypak CROSSWIND V TWPH 8550 - Schedule Menu Diagram

26
SCHEDULE Menu
MODEMODE
SCHEDULE Menu
UP key to Enter
SCHEDULE Menu
UP key to Enter
UPUP
UPUP
DOWNDOWN
Events per Day
1
Events per Day
1
Schedule Events
Set Current Time*
Set Current Time
09:09 AM
Set Current Time
09:09 AM
Set DefaultsSet Current Time
12:01 AM
Set Current Time
12:01 AM
Set DefaultsSet Current Time
12:01 AM
Adjust Current Time:
12:00 AM to 11:59 PM
*This screen is not
displayed when unit is
connected to Wi-Fi
UPUP
DOWNDOWN
Events selection:
0 to 4.
E1 VS Pump Speed
No Change
E1 VS Pump Speed
No Change
Events 1 to 4 Setup
E1 Start time
8:00 AM
E1 Start time
8:00 AM
E1 1-Speed Pump
No Change
E1 1-Speed Pump
No Change
E1 Auxiliary 1
No Change
E1 Auxiliary 1
No Change
E1 Auxiliary 2
No Change
E1 Auxiliary 2
No Change
Set Variable Speed Pump to:
Speed 1 to 4, Off or No Change
Set Start Time: 12:00 AM to
11:59 PM
Set Single Speed pump: On, Off
or No Change
Set Auxiliary 1 to: On, Off or No
Change
Set Auxiliary 2 to: On, Off or No
Change
E1 OperationMode
No Change
E1 OperationMode
No Change
Set Operation: Pool Heat, Pool
Cool*, Pool Auto*, Spa, Off or
No Change
SERVICESERVICE
SERVICESERVICE
Example:
Each Event executes a set of commands defined by the
user. For example, if the single speed pump output needs to
be turned on at 8:00 AM and turned off at 2:00 PM:
- Set “E1 start time” to 8:00 AM and “1-Speed Pump” to On.
- Set “E2 start time” to 2:00 PM and “1-Speed Pump” to Off.
Figure 53. Schedule Menu
Schedule Menu Diagram