45
3. Open the Raymote mobile app and log in with your
user name and password. See Figure 71.
Figure 71. Log in the Raymote Mobile App
Preparing the Unit for Connection
1. Stand near the display of the Crosswind V unit. Press
the CONNECT key. See Figure 72.
Figure 72. CONNECT Key
2. The CONNECT menu displays the Wi-Fi State,
indicating "Ready to Config" wireless connection,
and also the HOTSPOT identifier. See Figure 73.
Outside Lockout
45 F
HPPH-XXXXX
Ready to Config
Figure 73. Wi-Fi Ready to Congure and HOTSPOT
Identier
3. At this point your unit is ready for connection.
NOTE: The following sections provide the instructions for
Android and iPhone devices.
Add a New Heater to Raymote
1. In the Raymote app, press the menu button
located at the top left corner of the screen, then press
"+ Add new device". See Figure 74.
Figure 74. Add New Device
ADD THE FIRST UNIT
OR ADD MORE NEW UNITS
To Next Page
Loading...
