AVAILABLE MODELS AT J VOLTAGE
Notes:
• Supply circuit protective devices may be fuses or “HACR” type circuit breakers.
• Largest motor load is included in single circuit and multiple circuit 1.
• If non-standard fuse size is specified, use next size larger fuse size.
• J Voltage (208/240V) single phase air handler is designed to be used with single or
three phase 208/240V power. In the case of connecting 3-phase power to the air han-
dler terminal block, bring only two leads to the terminal block. Cap, insulate and fully
secure the third lead.
• The air handlers are shipped from the factory with the proper indoor coil installed, and
cannot be ordered without a coil.
2.4A AVAILABLE MODELS
RHAL-FR18PJ
RHAL-FR24PJ
RHAL-FR30PJ
RHAL-FR36PJ
RHAL-FR36TJ
RHBL-FR24TJ
RHBL-FR36TJ
8
To Next Page
Loading...
