Rheem RIDH09AVFJ - 13-2.Indoor Unit (Setting by Wireless Remote Controller)

- 136 -
MULTI TYPE 2, 3, 4 ROOMS TYPE
13-2. Indoor unit (setting by wireless remote controller)
• The function settings of the control of the indoor unit can be changed by this procedure
a
ccording to the installation conditions. Incorrect settings can cause the indoor unit malfunc-
tion.
• After the power is turned on, perform the “Function setting” according to the installation condi-
tions using the remote controller.
• The settings may be selected between the following two: function number or setting number.
• Settings will not be changed if invalid numbers or setting numbers are selected.

Preparation
Before connecting the power supply of the indoor unit, reconfirm following items:
• Piping air tight test and vacuuming have been performed firmly.
• There is no wiring mistake. Then, connect the power supply of the indoor unit.
Breaker on
Outdoor unit
Indoor units