Need help?Do you have a question about the Rheem RKNA SERIES and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Series | RKNA |
| Heating Capacity | 24, 000 - 60, 000 BTU/h |
| Cooling Capacity | 24, 000 - 60, 000 BTU/h |
| Warranty | 10-year limited warranty on compressor |
Overview of unit capacities, BTU/Hr heating inputs, and cooling capacities.
Lists key components like scroll compressor, heat exchanger, and blower.
General installation guidelines, codes, and references to standards.
Details for installing the unit on an outdoor slab, including drainage and access.
Considerations for rooftop installation, including structural support and curb details.
Instructions for connecting the gas supply, including piping and safety checks.
Steps and warnings for converting the unit from natural gas to LP gas.
Instructions for the condensate drain connection and trap installation.
Guidelines for connecting the main electrical power supply, including voltage and circuit requirements.
Guidance on thermostat compatibility and low voltage wiring.
Step-by-step description of the direct spark ignition and heating sequence.
Detailed instructions on how to start and shut down the furnace safely.
Procedures for annual inspection and cleaning of furnace components for safe operation.
Reference to the troubleshooting chart for diagnosing and resolving issues.
Airflow performance data for direct drive units at various speeds and static pressures.
Airflow performance data for belt drive units at various speeds and static pressures.
Wiring diagram for 1-phase, direct drive units at 208/230V.
Wiring diagram for 3-phase, belt drive units at 460V.
Wiring diagram for 3-phase, direct drive rooftop units at 460V.
Chart for determining refrigerant charge for 3-ton, 13 SEER units.
Chart for determining refrigerant charge for 5-ton, 13 SEER units.
To Next Page
