RHINO LARGE VIEW User Manual

I
INSTRUCTION MANUAL
RHINO
Auto-Darkening “LARGE VIEW” Welding Helmet

RHINO LARGE VIEW Specifications

General

Brand	RHINO
Model	LARGE VIEW
Category	Motorcycle Accessories
Language	English

Summary

Section 1 - Required Reading - Important Points and Safety

1.1 Important Information

Discusses the helmet's LCD lens, potential damage, and battery storage to prevent drain.

1.2 Customer Care & Warranty Inquiries

Information on checking for damage, warranty, and customer contact for inquiries.

1.2 Safety Precautions - Hazards of Arc Welding

Details safety measures and hazards associated with arc welding and helmet use.

Section 2 - Headgear Assembly Components and Installation

2.1 Headgear Assembly Components

Lists and illustrates the components of the headgear assembly.

2.2 Headgear Assembly Installation

Step-by-step instructions for assembling the headgear onto the helmet.

Section 3 - Adjusting Headgear

1. Over The Top Headgear Adjustment

Adjusts the helmet's height for balance and stability.

2. Headgear SnugFit Adjustment

Adjusts headgear for a tight fit by turning a knob.

3. Angle Adjustment

Adjusts the forward tilt angle using pins and levers.

4. Distance Adjustment

Adjusts the distance between the face and the lens.

Section 4 - Lens Cover Replacement

4.1 Exterior and Interior Lens Cover Replacement

Instructions on how to remove and replace the exterior and interior lens covers.

Section 5 - Variable Shade, Sensitivity, and Delay Adjustment

5.1 Variable Shade Knob

Guides on adjusting lens shade based on welding type and current using a control knob.

5.2 Sensitivity and Delay Adjustment

Explains how to adjust sensitivity and delay for optimal lens performance.

Section 6 - Battery Replacement

6.1 Battery Replacement

Details on replacing the two CR2025 lithium batteries and proper storage.